Introduction
The 2.5G switch lan 8 port also have built-in management mechanisms to ensure the smooth transmission of network packets. The network loop detection feature automatically locks out ports that cause broadcast storms to ensure that the network environment quickly returns to normal operation. We have also adopted a fanless design, but the unique air duct design enables it to balance heat dissipation efficiency and near-silent operation.Â
Feature
The 2.5G switch lan 8 port adopts store-and-forward mechanism and integrates high-capacity cache internally to ensure non-blocking wire-speed forwarding for all ports. Our products adapt to more emergent conditions, with a low-power design of the host, all-steel solder natural cooling, no fan can also ensure stable operation of the product, no noise more quiet. More critically, our dynamic LED indicators, providing simple working status tips and troubleshooting. Finally, all our ports support wire-speed forwarding, with plug-and-play characteristics.
Specifications
Standards |
IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.3z IEEE802.3ab IEEE802.3bz |
Device Interface |
8 x 2.5GBASE-T ports (10Mbps/100Mbps/1Gbps/2.5Gbps) LED indicators |
Data Transfer Rate |
Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) 2.5 Gigabit: 5Gbps (full duplex) |
Performance |
Data RAM Buffer: 1.5MB Switch Capacity: 40Gbps MAC Address Table: 16K entries Forwarding rate: 29.76Mbps (64-byte packet size) Jumbo Frame: 12KB |
Special Features |
Wall-Mountable Fanless |
Power |
Input: 100-240V AC, 50/60Hz Output: DC 12V/1.5A |
MTBF |
1120000 hours |
Operating Temperature |
0℃-40℃ (32℉-104℉) |
Operating Humidity |
Max 90% non-condensing |
Dimensions |
183x120x34mm |
Weight |
0.43kg |
Warranty |
2 years |
Package contents |
FS-1008G2.5 Quick Installation Guide |
Others |
FAQ
Q: What is the application scenario of FS-1008G2.5 switch?
A: With the continuous improvement of broadband services provided by network providers, the broadband bandwidth has entered the period of 2000 Mbit/s. A 2.5G switch can meet users' requirements for high bandwidth.
Q: Why is an 8-port 2.5G switch designed?
A: In the general actual use scenario, for family use, 5 is not enough, 16 is too much, lack of cost performance, and 8 is a good balance.
Q: Will the 2.5G SWITCH be a transitional switch?
A: Currently, 2.5G switches have a minimum of 5 years of life. For one reason, operators to 2000M broadband, now is the beginning, need to continue for a period of time. Another reason is that the reading speed of the mechanical hard disk, 2.5g transmission rate can meet the full rate, while the mechanical hard disk, although in the continuous exit from the market, but good cost performance, still has a certain period of use.
http://www.fujanet.com/